Modin tekeminen, säätö jne.

[Valmet500]

Pystyykö tommosesta aihiosta väsäämään ketsupissa ja giantsissa rattoria?
mikä on helpoin tapa?

Mä ainakin alotan suurinpiirtein noin!

[Valtra6550]

Joo niin mäkin...

[Simulation]

no entäs mitne saan textuurit toimimaan jos esim muokkaan paint-net:llä jotakin textuuria niin miten saan ne toimimaan?

[JkkaM]

Tallennetaan vaan niiden entisten päälle Kannattaa toki varmuuskopioida se alkuperäinenkin.

[Simulation]

mulla ainakin tuli auroista mustat ku muokkasin textuureja

[JkkaM]

Koitappa paint.netillä tallentaessa laittaa ruksi kohtaan Generate Mip Maps

[Muskeli_]

Pystyykö jollakin ohjelmalla tekemään kuvasta 3D-mallin?

[JkkaM]

Mitä tarkoitat? Että kuvan saa jotenkin sinne taustalle auttamaan vai mitenkä?

Semmoista tuskin on, että jos laittaa sinne 3 kuvaa niin se tekee kuvasta kolmiulotteisen mallin. (tai jos on niin maksaa maltaita)

[Simulation]

http://www.inivis.com/ tossa on parempi ohjelma kuin ketsup... tolla voi vielä ehkä saahakki giantsiin modin koska uk:n sivuilla jotkut käyttää tätä ohjelmaa...

[Traktori_Mies]

Latasin tuon mutta tuosta ei saa kyl selvää erkkikää

[Simulation]

yritä harjoitella, löysin ton ohjelman nimen ls-uk:n sivulta ku yks oli tekemässä ratasta!

[Mr-Wedenoja]

miten siirretään toisen traktorin kori toiseen?

[Simulation]

http://www.filefront.com/thankyou.php?f ... 9adde6918b
tossa on jokin ohjelma/tiedosto millä saa muutettua 08:sin modit 09:iin, ls uk:sta löyty, tässä suora lainaus:
I got this from martin23 and translated it to english but i havnt been able to figure it out. It basically tells you what you need to do to convert LS08 mods to LS09 but im no good when it comes to scripts so its best left to someone who knows what there doing. Hopefully by posting this someone can make sense of it and we can get to work on converting all the great mods from LS08.
eli tällä voisitte saaha sen pyöröpaalien nostajan tähän 09:iin

[Simulation]

http://www.filefront.com/thankyou.php?f ... 9adde6918b
tossa on jokin ohjelma/tiedosto millä saa muutettua 08:sin modit 09:iin, ls uk:sta löyty, tässä suora lainaus:
I got this from martin23 and translated it to english but i havnt been able to figure it out. It basically tells you what you need to do to convert LS08 mods to LS09 but im no good when it comes to scripts so its best left to someone who knows what there doing. Hopefully by posting this someone can make sense of it and we can get to work on converting all the great mods from LS08.
eli tällä voisitte saaha sen pyöröpaalien nostajan tähän 09:iin

tässä olis vielä jonkun laittamat ohjeet:
You have a mod that you like to play in LS08? This really what you want now in LS09 see and use? Then do the following:

1. Create a new folder on the desktop (which is already included ... simply rausziehen)

2. The tractor has to convert a few files. Mach i3d times its normal with the text editor and look under <Files> after "*. png or *. dds files.
These files are you looking for the basis of the path, and then the copy in your new folder into it.



3. A picture dealer, you need to get even. Join the i3d of tractors to be converted with the GE (Giants Editor) and press in accordance with good orientation simply "print" button on your Tastertur. Then open an image editing program of your choice and add the image with "CTRL & V" in it. Store it as "Your Traktorname.png" file into your new folder. (should be 256 times the size 256 px (pixels) or not exceed)

4. Copy you now "modDesc.xml" out. Even in your folder. Similarly, the "farmer_diffuse.png". Is urgently needed.

Now we can go ... yes ... ... ..

5. Open your tractor in the GE ... .. So the i3d (preferably double-click it).
Now look at the top of the bar after work a symbol, a + (for import file). Holst you order the "farmerCar.i3d of TestMod folder in addition to your tractor.
Search the following Collis (objects): farmer and traffic collision trigger.
This cut you out of the Farmercar from. To do this click the files with "CTRL and left mouse button individually (should both be checked) .... But at the top of the bar work and look in" Edit "- drop-down menu to" Cut ".... You then delete the Farmercar from your mod raus. To do this you click once on "compactCar" ... then "Edit (top)" and then "Delete".

Now you have your back ONLY tractor in sight.
Remember, you had it cut or what?
Exactly 2 Collis. The need now in the purely Mod. To do this you click on the ModName ... then "Edit" then "Paste". And lo and behold, both exist.

Klasse gemacht. The mod itself is ready. Close the upper right corner of GE with the famous Windows Cross. Now you will asked if the file is saved and available to be overwritten ... .. OF COURSE you want the

6. Now you editing the xml * follow your tractor. (must be, otherwise no gibs Mod).
With your choice to open the editor (we recommend notepad).
At the top stand has to edit the first line of code:
<vehicle type="Deine Traktorname.ula">
<name>
Your Name <en> Tractors </ s>
Your Name <de> Tractors </ en>
</ name>
This replaces you with the following:
<vehicle type="tractor">
<annotation> Copyright (C), All Rights Reserved. </ annotation>
<name>
Your Name <en> Tractors </ s>
Your Name <de> Tractors </ en>
</ name>
<typeDesc>
Your Name <en> Tractors </ s>
Your Name <de> Tractors </ en>
</ typeDesc>

Now slowly scroll down a little further and look for the code lines that start with "wheel" begin:
<wheels autoRotateBackSpeed=".?.?.">
<wheel1 ... .. />
<wheel2 ... .. />
<wheel3 ... .. />
<wheel4 ... .. />
</ wheels>
Remove the items that are directly behind the wheel is full. Why? Well, you do not, your mod is being later in the game, but never on the move or stuck deep in the ground.

Scroll further down until you have the following line of code've found:
<exitPoint index="9" />

Replace these with the specified lines of code:
<enterReferenceNode index="0> "/>
<exitPoint index = "?" />
<size width="3.8" length="7.5" lengthOffset="-0.2"/>
<characterNode index = "?" cameraMinDistance = "1.5" />
<aiTrafficCollisionTrigger index = "?" />
<components count="1">
<component1 centerOfMass="0 0 0" solverIterationCount="10" />
</ components>

Accurate review out now, please. The are 3 question marks in the code entered. There are so-called "Index Numbers" pure.
As you stated the rausbekommst you, in addition to the declaration, the supplied Pic, called "Indexe_zählen.JPG"

NC again i3d of your tractor with the GE (if you already saved it and had closed). Open well as on the image to see the Colli tree. Now you take a piece of paper and pen (which is better, you verzählt fast).
Count now, as described in the picture, the individual Collis
(in the xml are the index)
At first the "index exitPoint"
Then the farmer (characterNode index)
Recently the traffic collision trigger (aiTrafficCollisionTrigger index)

Replace the corresponding rows in the following question mark by your numbers counted.

Xml from the memory ... so you have the tractor Gamereif made.









7. It is however still missing something. The dealer. This is the "modDesc.xml" necessary
Open it with an editor of your choice. You see right away which is not nearly as complex as the Vehicle.xml of a tractor.
And easy to edit it as well.

Search lines of code (there is 2 times .... For the English edition and German edition):
<name>? ? ? </ name>

Wear instead of 4? Tractors your name.

Search for:
<image active="?? ?.png"/>

You correctly, you had a picture made of your tractor. Replace the 4? dem.png before by the name of the pics (picture).

Among them:
<price>? ? ? ? </ price>

Replace the 4? by a total .... (max six). This is the amount for which your mod later to buy the handler will be.

Among them:
<xmlFilename>? ? ? ?. xml </ xmlFilename>

Replace the 4? by the name of your Traktor.xml. (Example:?. FarmerCar.xml = xml)

Done. Have to save the whole folder and in your being purely miss.

8. Sooooooo ... ...

In the folder TestMod are still two "bat dateien". A "7za.exe and makeZIP.cmd".
Copy also in your folder and double-click inside the "makeZIP.cmd". Done.
Do not worry, even though now you've seen nothing on the desktop is now a ZIP archive, which is the name: "sampleMod.zip" bears.

THIS IS YOUR TRACTOR

The best change you now have the name "sampleMod" in the name of your tractor.
Now you copy this folder in ZIP:
C: \ Documents and Settings \ Your PC \ My Documents \ My Games \ FarmingSimulator2009 \ mods

Done. LS09 start ... .... Going to the dealer .... Buy tractor .... Farmers are.

Congratulations, You've created your first mod. Although only from LS08 to LS09 converted, but the warst DU everything alone.
[Report Comment]

[TeamSuzuki]

Voisko joku jelppiä ku haluaisin muokata pari konetta et olis paripyörät alla......lisätkää vaik meseen nii helpompi kirjotella....

[Simulation]

Koitappa paint.netillä tallentaessa laittaa ruksi kohtaan Generate Mip Maps

missä se semmonen kohta on? ei mulla ainakaan lue missään...

[Motokuski]

Koitappa paint.netillä tallentaessa laittaa ruksi kohtaan Generate Mip Maps

missä se semmonen kohta on? ei mulla ainakaan lue missään...

Siis kun painat sitä "Save" nappia, niin tulee semmonen "ikkuna". Tässä kuva:

[Simulation]

joo, on mullaki noi dds-tiedostoissa, mutta kun jotkin textuurit ovat pgn-muodossa, niin siinä onkin vain näin:

[Motokuski]

joo, on mullaki noi dds-tiedostoissa, mutta kun jotkin textuurit ovat pgn-muodossa, niin siinä onkin vain näin:

No niihinhän ei luonnollisesti tarvi sitä ruksia laittaa

[Simulation]

mutta kun sitten kone on läpeensä musta!

[Motokuski]

Mutta niissä kaikissa .dds-tiedostoissa pitää olla tuo ruksi. Onko jokaikisessä sen modin .dds-tiedostossa?

[Simulation]

jaa pitää kokeilla... en oo muokannu kuin yhtä niistä textuureista ja se oli vain pgn...

[4ntti93]

mihin se kone pitää siirtää, kun on saanut sen ketsupissa valmiiksi?

[jii.veivo]

Voisko joku kertoa miten modiin saa vaihdettua eri äänet ja mistä saa muokattua tehoja, nopeutta yms.

[4ntti93]

Voisko joku kertoa miten modiin saa vaihdettua eri äänet ja mistä saa muokattua tehoja, nopeutta yms.

tehoja saa kai sieltä koneen omasta xlm-tiedostosta lisättyä...