Raise rear hydraulics v3.51

[Valmet 1502]

En tiedä tosta alla olevasta tekstistä mitä se sisältää, mutta lyhyesti voi manuaalisesti nostaa ja laskea nostovarret. Kannattaa ladata jos haluaa vähän realistisuutta lisää.

zzz_setBackLinkage.zip this ensures that the lower links of the rear hydraulics are raised when you attach a trailer via ball head. Connects additionally a PTO, the lower link of the rear hydraulics are degraded. Thus, since nothing can get in the way: whistling: (cornering ..).

Hotfix 1.1:
The rear linkage is now only lowered when the trailer is uncoupled with Kugelkopfanhängung from the tractor. Before that happened even if, for example forward still had a weight, and the abkoppelte first.

Declaration on the xml entry:
In the modDesc the zzz_setBackLinkage.zip or the Fzg.xml the stretcher can be adjusted a few things .. In addition one examined in the modDesc following line: (This line can you also add in Fzg.xml the tractor to specifically for this Tractor adjust the values)
<setBackLinkageUp maxRot="25" rotSpeed="0.45" doDismantleBackLinkageIfPTOIsNeeded="true" />

First day:
maxRot="25"
This value indicates how far the Herckhydraulik is lifted.

Second day:
rotSpeed="0.45"
This value indicates how fast the rear hydraulics is raised and lowered.

Third day:
doDismantleBackLinkageIfPTOIsNeeded="true"
Here it is determined whether the lower links of the rear hydraulics to degrade when connecting a PTO with the tractor. If they do not degrade, then fill in the 'true' set to 'false'.

Credits: ???

Lataa tästä...

[Pelaaja80]

Vielä kun värkkäisit ulkoota saman.

[Kasitonni]

Mun mielestä tosa kuvassa näyttää että veto/nostovarret olis kokonaan pois. Ihan kätevää irl ku vetää paljon kärryä.

[rimpe]

miten noita nostevarsia voi nostaa ja laskea kun kärry on perässä vai voiko ollenkaan?

[Valmet 1502]

miten noita nostevarsia voi nostaa ja laskea kun kärry on perässä vai voiko ollenkaan?

Ei voi silloin kun on kärry perässä, vain silloin kun ei ole mitään kiinitettynä

[MMN FIN]

Pitääkö asentaa jotenkin traktoriin?

[Valmet 1502]

Pitääkö asentaa jotenkin traktoriin?

Ei tarvitse

[Taavi Kemppainen]

En tiedä tosta alla olevasta tekstistä mitä se sisältää, mutta lyhyesti voi manuaalisesti nostaa ja laskea nostovarret. Kannattaa ladata jos haluaa vähän realistisuutta lisää.

zzz_setBackLinkage.zip this ensures that the lower links of the rear hydraulics are raised when you attach a trailer via ball head. Connects additionally a PTO, the lower link of the rear hydraulics are degraded. Thus, since nothing can get in the way: whistling: (cornering ..).

Hotfix 1.1:
The rear linkage is now only lowered when the trailer is uncoupled with Kugelkopfanhängung from the tractor. Before that happened even if, for example forward still had a weight, and the abkoppelte first.

Declaration on the xml entry:
In the modDesc the zzz_setBackLinkage.zip or the Fzg.xml the stretcher can be adjusted a few things .. In addition one examined in the modDesc following line: (This line can you also add in Fzg.xml the tractor to specifically for this Tractor adjust the values)
<setBackLinkageUp maxRot="25" rotSpeed="0.45" doDismantleBackLinkageIfPTOIsNeeded="true" />

First day:
maxRot="25"
This value indicates how far the Herckhydraulik is lifted.

Second day:
rotSpeed="0.45"
This value indicates how fast the rear hydraulics is raised and lowered.

Third day:
doDismantleBackLinkageIfPTOIsNeeded="true"
Here it is determined whether the lower links of the rear hydraulics to degrade when connecting a PTO with the tractor. If they do not degrade, then fill in the 'true' set to 'false'.

Credits: ???

Lataa tästä...

Voisko tän konvaa FS17, ja tulevaisuudessa FS19? Olis kiva.